|
|
The teeth whitening industry is filled with countless products and methods. Despite all the confusion between whitening strips, paint-on products and the cheaper boil-n-bite mouth guards, nothing is proven more reliable, safe and effective as a custom made whitening tray molded to your own teeth and made by lab technicians.
We serve thousands of satisfied tooth whitening customers each year.
We will priority mail you the necessary materials and instructions to correctly make an impression of your teeth and gums. New technology makes taking your impressions, simple, easy and quick. Upon the return of the impressions to our dental lab, we will produce and return ship a custom-fitted tray trimmed around your gum line. With our custom made dental trays in combination with our #1 rated bleaching gels you will start noticing a whiter smile within days.
It’s that simple. You really can have a professional smile without going to the dentist.
|
|
Making Impressions
|
Applying Bleach
|
|
1. Remove one catalyst paste and one base paste and mix the two together by rolling and kneading in your hands for approximately 45 seconds until well blended into one color. The material will begin to harden after 1 minute.
2. Roll out the material the width of the tray. Press the material and shape into the tray.
3. Place the loaded tray over the upper teeth. Teeth should be centered in the impression material. Press firmly with your fingers so you can feel the material flow over your teeth and gums. Do Not Bite Down - just hold in place with your fingers. The impression material will extrude through the holes in the tray. Keep the impression in place for about 2 minutes, then remove carefully. THE TOTAL AMOUNT OF TIME TO MAKE YOUR IMPRESSIONS IS ONLY 3 MINUTES EACH. DO NOT remove the molds from the trays.
4. Check to make sure that you can see the impressions of your teeth in the impression putty. In case of error, you may use the tray again. An extra set of impression material is included.
5. To make the impressions for the lower teeth, repeat steps 2-4.
Place the tray over the lower teeth. Remember not to bite down.
6. Let the trays harden (about 20 minutes), then rinse gently under
cold water.
7. IMPORTANT: Fill out the white identification card (attached to system box flap)and place the impressions and card in the pre-addressed envelope and mail. We will make your customized bleaching trays in our certified laboratory and send them back to you within 2-7 business days. Applying Bleaching Gel >>
|
|
| |
|